Learn some tips that can help you best maintain and repair your own plumbing. You can figure out everything you need to not fall for unnecessary equipment and expenses and how to save money by doing it all yourself. It’s not so scary once you know the basics of plumbing.
Use a shop vacuum to unplug your toilets or drains, if a hard object is clogging it. Using a plunger will only push the object further and make it impossible to remove. If you do not have a shop vacuum, you can rent one from most Walmart stores or from similar franchises.
For the most effective plunger to use on a toilet, choose one with a flange that sticks out from the end and fits into the hole in the bottom of the bowl. These typically work better than the classic cup-style plungers, since they create a tighter seal in the drain.
Drain the sediment from the bottom of your hot water heater twice a year to keep the hot water heater working at its optimal levels. Simply open the drain valve and allow the water to run out into a bucket until the water runs clear. Then close the drain valve.
You should drain all of the water out of the tank of your hot water heater at least once every three to six months. Draining all of the water out of the tank helps to prevent sediment build-up at the bottom of the tank. This sediment can cause the tank to bang or to heat less efficiently.
How can you find out if there are pipes in the wall you intend to do work on? You can buy a pipe and stud sensor at the hardware store, but if you don’t plan on using it again that’s probably a waste of money. If you’re going to be putting something big on the wall you can cut a piece out to peek inside then cover it with your project.
If you have a leak and your water bill is going up, there is a method you can try before you call a professional. You can use the red-dye system to detect whether the leak is above ground, underground, or whether it has anything to do with the toilets.
Use a foaming root killer, twice yearly, to remove tree roots that can bring your drains to a standstill. Foaming products fill the entire pipe with chemicals, killing roots that grow from the top of the pipe as well as the part that water flows through. They are more effective than regular root killers for this reason.
Make sure your plumbing contractor has the proper insurance before letting them work in your home. This is a big problem with all types of construction contractors. They may have the proper licenses, but because of the high cost of insurance, they may not be properly insured and can end up on your homeowners policy if they get hurt.
A plumbing snake is an essential tool in any homeowner’s tool box. Snakes can be used to unclog kitchen and bathrooms drains and toilets when clogged with hardened debris. They are useful as well for grabbing hold of items dropped down sink drains. Snakes come in a variety of sizes for home use and heavier-duty models can often be rented for bigger jobs.
Make sure overflow holes are cleaned out. This can help to prevent any water damage. Overflow holes are a way to stop water from overflowing if a sink is left on by accident. If the overflow hole is clogged it will not be able to do its job.
When you’re going away on a vacation, you should consider shutting off the water supply to your home. This can help stop many problems before they start. If you don’t do this, you should have someone stop by your house regularly to check that nothing has gone wrong and that your home isn’t flooded.
Knowing how to avoid frozen pipes is going to help save your home from the potential flooding that can occur if they should freeze. Make sure the temperature in your home does not fall below fifty-five degrees. Caulk any air leaks that are near your plumbing to avoid freezing problems.
If the pipes have burst in an upstairs area, use a tool to perforate the ceiling underneath in several places and places pots and pans under to catch the water. If this is not done, the weight of the accumulating water could cause a collapse of the entire ceiling.
Avoid pouring grease or oil down your kitchen sink drain. Grease and oil can build up in your pipes and cause a backup. Instead, wait for the grease or oil to cool and solidify and either throw it away or see if there’s a place to recycle it near your home.
If you’re planning on connecting galvanized steel to copper pipes you need to use a dielectric union to make sure that the steel doesn’t corrode. It is made of both steel and copper and will ensure that the union is tight, safe, and lasts as long as your house is standing.
As you can see, maintaining and repairing your own plumbing isn’t as difficult as it may appear at first glance. It just requires doing research, getting documents in order and asking a lot of questions. The work will pay off once you see how it can help save you money.